For AI agents: the complete documentation index is available at https://docs.clickmax.io/en/llms.txt, the full documentation bundle is available at https://docs.clickmax.io/en/llms-full.txt, and this page is available as Markdown at https://docs.clickmax.io/en/guides/publish-with-your-own-domain.md.
  • English

      • How do I put my funnel live on my own domain?

      Going live has two halves that people routinely confuse: publishing the funnel (the content is ready) and connecting the domain (there is an address to reach it at). Both have to happen.

      Before you start

      • Role: Owner or Admin to touch domains; an Editor can already publish funnels.
      • If the domain is new, start early: DNS propagation can take up to 48 hours.

      1. Get a domain

      Two options:

      2. Point the DNS and wait

      A domain bought through Clickmax arrives already pointed. An external domain needs the CNAME record shown on the domain's details at your provider — see connect a domain you already own.

      While the DNS is not answering, the domain sits at Connecting. That is normal — do not redo the configuration every ten minutes, because each change restarts propagation.

      Once the domain is Connected, choose it on the funnel under Funnel Settings → Basic → Domain. Every page in the funnel then uses that address.

      An individual page can use a different domain, set under Page Settings.

      The next funnel step always opens on the funnel's domain. If the capture page uses its own domain and the funnel does not, whoever fills in the form leaves your address and lands on the funnel's address. To keep visitors on the same address from start to finish, use the same domain on the funnel and on its pages.

      4. Publish

      Publish the funnel. Content that is saved but not published never reaches the visitor — it is the single most common cause of "my domain is connected but the page doesn't show".

      5. Test it as a visitor

      Open the final address in a private window, on mobile and on desktop. Confirm it loads, that the checkout opens and that tracking fires.

      If it didn't work

      • The domain never leaves Connecting: see my domain does not open.
      • Connected, but the page does not show: confirm the funnel was published and that the domain is linked to it.
      • After filling in the form, the visitor goes to a different address: the page has one domain and the funnel another. Pick the same domain on both.